Arial
Times New Roman
Wingdings
Monotype Sorts
Symbol
BJDM
Display
Dimensions Dimensions
Use to add a single horizontal dimension with dimension text between extension lines.
Vis_PE.chm!#27478 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
`1Choose the displayed precision for the dimension. Precision
`#Choose the units for the dimension. Units Use Drawing Page's Units;.Feet-Inch (1'-0"");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
`4Choose whether or not to display unit abbreviations. Units Display Don't Show Units;Show Units
Both `)Choose which extension lines are visible. Extension Lines ` Both;End only;Begin only;Neither
`8Choose the angle at which the dimension line is rotated.
Precision && Units... Prop.LPrec.Invisible
Set As Page Default ThePage!User.LPrec Prop.LPrec User.LPrecVal ThePage!User.LUnits Prop.LUnits User.LUnitsVal ThePage!User.ShowUnits Prop.ShowUnits User.ShowUnitsVal
Revert To Page Default Prop.LPrec User.LPrecVal Prop.LUnits User.LUnitsVal Prop.ShowUnits User.ShowUnitsVal
_Reset Text Position Controls.X2 Scratch.X1 Controls.Y2 Height
Extension Lines... Prop.LPrec.Invisible
Change Dimension Height
Reposition Text
Use Drawing Page's Units;.Feet-Inch (1'-0");.Feet (1.00');.Inches;.Feet (1.00ft);.Miles;-Millimeters;-Centimeters;-Meters;-Kilometers
0.00
Use Drawing Page's Units
Don't Show Units
1.00
esc(0)
`.0;0FT 0IN;0.0FT;0IN;0FT;0MI;0 MM;0 CM;0 M;0 KM
`"Linear Precision Formatting String
`#0=Dwg, 1=Arch, 2=Dec Ft, 3+ = other
Horizontal,Use,add,single,dimension,text,between,extension,lines,Dimensioning,Engineering,linear,angular,radial,measurements,dimensional,analysis
Use to add a single vertical dimension with dimension text between extension lines.
Vis_PE.chm!#27489 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Vertical,Use,add,single,dimension,text,between,extension,lines,Dimensioning,Engineering,linear,angular,radial,measurements,dimensional,analysis
Q(-DT `8Choose the angle at which the dimension line is rotated. Q(-DT
Drag to add an arc with adjustable size and orientation. Complementary arc can be shown.
entary arc.
arc.
llipse.
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PE.chm!#27492
Resize Arc
Actions.Action Show Complementary Arc
`sArc,graphical,Drag,add,adjustable,size,orientation,Complementary,shown,Drawing,Tool,graphics,architectural,drawings
Drag to add a circle or ellipse with text that stays level when shape is rotated.
otated.
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PE.chm!#27502
`]Circle,ellipse,Drag,add,text,stays,level,rotated,Drawing,Tool,graphics,architectural,drawings
Use to add a dimension to an arc or circle. Place endpoint at arc center, control handle on arc.
f the arc.
Vis_PE.chm!#27486 `?Copyright (c) 2001 Microsoft Corporation. All rights reserved.
Radius,outside,Use,add,dimension,arc,circle,Place,endpoint,center,control,handle,on,Dimensioning,Engineering,linear,angular,radial,measurements,dimensional,analysis
Place On Arc
_Hide Crosshair _Show Crosshair Scratch.D1
Hide Crosshair
Hide the crosshair.
_Hide Crosshair
0
0.25
Drag to add a circle defined by diameter. Adjustable eccentricity allows for ellipse.
`?Copyright (c) 2001 Microsoft Corporation. All rights reserved. Vis_PE.chm!#27498
Change Curvature
Controls.Y1 Width/2 Reset To Circular
`tCircle,diameter,Drag,add,defined,Adjustable,eccentricity,allows,ellipse,Drawing,Tool,graphics,architectural,drawings
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Visio Extras\Annotations (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Visio Extras\Dimensioning - Engineering (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Visio Extras\Drawing Tool Shapes (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Mechanical Engineering\Fasteners 1 (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Mechanical Engineering\Fasteners 2 (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Mechanical Engineering\Geometric Dimensioning and Tolerancing (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Mechanical Engineering\Springs and Bearings (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Visio Extras\Title Blocks (US units).vss
C:\Program Files\Microsoft Office\Visio10\1033\Solutions\Mechanical Engineering\Welding Symbols (US units).vss
Annotations Annotations
Dimensions
20
40
6
700
172
90
18
10
70
110
15
50
500
fffff
55
31
350
115
235
590
310
450
4,8
0.0
109,5
20,3
235,2
114,4
240,3
15,4
20,7
Guide
TheDoc
Page-1
Gesture Format
Horizontal
LPrec
Extensions
LUnits
Angle
ShowUnits
Black fill
White fill
Blue fill
Red fill
Green fill
Cyan fill
Yellow fill
Magenta fill
Gray fill
10% Gray fill
White line
30% Gray fill
Long dashed line
Blue dark fill
Cyan dark fill
Green dark fill
Magenta dark fill
Red dark fill
Yellow dark fill
50% Gray fill
70% Gray fill
90% Gray fill
1pxl line
3pxl line
9pxl line
Hairline
Short dashed line
Arial centered
Arial top left
Arial top
Times centered
Times top
Times top left
Callout
Dimension
AntiScale
LUnitsFactor
FormatString
LengthText
Length
LPFString
LPrecInd
LPrecVal
LUnitsInd
LUnitsVal
ShowUnitsInd
ShowUnitsVal
FeetInch
Feet
Inch
InchPrec
LocEndX
LocEndY
visObjectType
DrawingUnitFactor
visKeywords
visVersion
Vertical
Page-4
Radius outside.147
Arc - graphical
Page-2
Circle, ellipse
Horizontal.44
Vertical.47
Vertical.48
Horizontal.51
Horizontal.52
Horizontal.53
Vertical.54
Vertical.55
Vertical.56
Vertical.57
Vertical.58
Horizontal.61
Vertical.62
Vertical.63
Horizontal.64
Vertical.87
Vertical.88
Horizontal.89
Horizontal.90
Horizontal.91
Horizontal.92
Vertical.93
Vertical.94
Vertical.96
Vertical.97
Vertical.98
Vertical.99
Vertical.100
Radius outside
Horizontal.106
Vertical.109
Horizontal.111
Circle, ellipse.114
Horizontal.115
Circle - diameter
Horizontal.117
Vertical.124
Vertical.125
Horizontal.116
Circle, ellipse.128
Circle - diameter.2
Arc - graphical.13
Circle, ellipse.134
Vertical.136
Horizontal.137
Arc - graphical.19
Circle, ellipse.142
Circle, ellipse.146
Vertical.149
Horizontal.150
Horizontal.152
Horizontal.155
Arc - graphical.156
Horizontal.151
Vertical.162
Page-5
Horizontal.21
Horizontal.23
Vertical.27
Radius outside.28
Page-3
Horizontal.6
Horizontal.7
Horizontal.2
Horizontal.13
Vertical.14