|
International Class Rules effective April 2009 Authority: Wayfarer International Committee .. Please note: Length measurements are in millimetres (with Imperial in brackets). Weight measurements are in kilograms (with pounds in brackets). Volume measurements are in litres (with English gallons in brackets). .. |
![]() |
|
|
|
| SECTION I - 1. INTENTION AND INTERPRETATION | |
| SECTION II - PROTECTION OF ONE DESIGN AND MEASUREMENT | |
| 2. Conditions of Building and Construction | 3. Registration |
| 4. Certificate | 5.1 Measurement Procedure |
| 5.6 Compliance with Rules | 5.11 Remeasurement |
| SECTION III - MEASUREMENT CONTROLS | |
| 6. Terminology | 7. One-Design Interpretation |
| 8-10. Hull Configuration Controls | 11. Keel |
| 12. Bilge Keels | 13. Gunwale Structure |
| 14. Centreboard Case | 15. Apertures in Hull Skin |
| 16 Projections Beyond Hull Skin | 17. Centreboard |
| 18. Rudder | 19. Decking |
| 20. Apertures in Decks and Bulkheads | 21. Hatches |
| 22. Thwarts and Benches | 23. Floorboards |
| 24. Shroud Plates | 25. Hull Weight |
| 26. Mast | 27. Boom |
| 28. Spinnaker, Asymmetric Pole and Jib Stick | 29. Rigging |
| 30. Sail Construction/Markings | 31. Mainsail |
| 32. Jibs | 33. Spinnaker |
| SECTION IV - GENERAL | |
| 34. Buoyancy | 35. Special Prohibitions |
| 36, 38. Class Number, Class Signal | 37. Crew |
| Dispensations | Interpretations |